* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Good. Not using same gyro chip (bd5883)as main bn880 but seems to work fine. antenna is also passive (less gain)not active like in bn880. good value for 11.50 usd but wouldnt worth more. thanks.
Good. Not using same gyro chip (bd5883)as main bn880 but seems to work fine. antenna is also passive (less gain)not active like in bn880. good value for 11.50 usd but wouldnt worth more. thanks.
Good. Not using same gyro chip (bd5883)as main bn880 but seems to work fine. antenna is also passive (less gain)not active like in bn880. good value for 11.50 usd but wouldnt worth more. thanks.
I have tested both modules, BN-880 and BN-880Q. Both work with Betaflight and INAV. I've had more satellites with the normal BN-880 but better precision with BN-880Q. Maybe this is because of some settings to do with U-Center but I have to figure out how. Both modules are setup by now directly through INAV with addition of GALILEO. Compass on BN-880Q is QMC5883 where it is HMC5883L on BN-880. Can't see any functional difference.
I have tested both modules, BN-880 and BN-880Q. Both work with Betaflight and INAV. I've had more satellites with the normal BN-880 but better precision with BN-880Q. Maybe this is because of some settings to do with U-Center but I have to figure out how. Both modules are setup by now directly through INAV with addition of GALILEO. Compass on BN-880Q is QMC5883 where it is HMC5883L on BN-880. Can't see any functional difference.
I have tested both modules, BN-880 and BN-880Q. Both work with Betaflight and INAV. I've had more satellites with the normal BN-880 but better precision with BN-880Q. Maybe this is because of some settings to do with U-Center but I have to figure out how. Both modules are setup by now directly through INAV with addition of GALILEO. Compass on BN-880Q is QMC5883 where it is HMC5883L on BN-880. Can't see any functional difference.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 36|
Show Original
A part of the QA has been auto-translated.
0
Q:
what is a difference between 800 normal and 880Q?
I use F7 flight controller board with inav and I live in Italy.
what is a difference between 800 normal and 880Q?
I use F7 flight controller board with inav and I live in Italy.
It’s one board instead of two but more importantly this version uses a clone magnetometer that is known to be flaky or sometimes not work at all with some software including iNav.
It’s one board instead of two but more importantly this version uses a clone magnetometer that is known to be flaky or sometimes not work at all with some software including iNav.
Answered by RonCurry on 20/10/2019Helpful (0)
0
Q:
what a difference for beitian 880 e beitian 880q?
I have a f7 flight controller matek.
what a difference for beitian 880 e beitian 880q?
I have a f7 flight controller matek.
Sorry,i dont know, im using betaflight and a regular F4 or F7 FC. I would suggest to use google. Im sure there are other people using this module with arducopter.
Sorry,i dont know, im using betaflight and a regular F4 or F7 FC. I would suggest to use google. Im sure there are other people using this module with arducopter.
Answered by Kamil on 08/09/2021Helpful (0)
0
Q:
hello, but this gps modul have 6 wires, i am talking about the sdl and sda kabel wich is connecting the compass to the board, where souldt i solder this two cables??
i use the FC-10 dot.
hello, but this gps modul have 6 wires, i am talking about the sdl and sda kabel wich is connecting the compass to the board, where souldt i solder this two cables??
i use the FC-10 dot.
Yes, parveauadrien, the GPS has four wires. The two other ones are for the magnetometer (I²C). Find free pads for SDA and SCL on your flight controller and solder them there.
Yes, parveauadrien, the GPS has four wires. The two other ones are for the magnetometer (I²C). Find free pads for SDA and SCL on your flight controller and solder them there.
This works with all generic FC's sold. best you check what your FY-41 manual say
This works with all generic FC's sold. best you check what your FY-41 manual say
Answered by pierre on 07/12/2021Helpful (0)
0
Q:
I run Arducopter on Matek F-405 Ctr but it won't detect this GPS module. It says bad compass health, compass not calibrated. I can't seem to enable the compass on mission planner. What have I missed?
I run Arducopter on Matek F-405 Ctr but it won't detect this GPS module. It says bad compass health, compass not calibrated. I can't seem to enable the compass on mission planner. What have I missed?
Yes, this one includes a "compass" (magnetometer). Communication with magnetometer is over I²C bus. GPS communications is over standard Serial (Rx Tx).
Yes, this one includes a "compass" (magnetometer). Communication with magnetometer is over I²C bus. GPS communications is over standard Serial (Rx Tx).
Answered by dennisglanby on 16/03/2021Helpful (0)
0
Q:
this gps have 6 wires, where shouldt i solder the scl and sda wires on the FC-10 Board??
this gps have 6 wires, where shouldt i solder the scl and sda wires on the FC-10 Board??
Yes.Kopilot uses standard UBLOX serial protocol to talk to the GPS unit. This one is a bit of an overkill, though because it comes with a compass too. Kopilot doesn't know how to use compass. Probably doesn't need to. I test mine with RTH every time before I fly long range, and it hasn't failed once.
Yes.Kopilot uses standard UBLOX serial protocol to talk to the GPS unit. This one is a bit of an overkill, though because it comes with a compass too. Kopilot doesn't know how to use compass. Probably doesn't need to. I test mine with RTH every time before I fly long range, and it hasn't failed once.
Answered by voxtel on 22/12/2020Helpful (0)
0
Q:
After 4 months saved, when I went to use it, it didn't work, it seems the battery drained, and it doesn't charge anymore. Any suggestions
Após 4 meses guardado, quando fui utiliza lo, não funcionava, parece que a bateria descarregou, e não carrega mais. Alguma sugestão? Obrigado