* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
- Copy the key file(gs.key) to the installation directory of the ground station.
- Double click to open the fpv4win program;
- Select the correct Adapter(usually RTL8812AU), Channel (161 defaults, this Adapter only works in the 5.8GHz, and the available channels rangefrom 36 to 177), and Codec(H265 defaults, with high compression and low latency),
- First, install the app and then save the key file(gs.key) to your phone.
- Open FPVue, find WFB-NG settings in the upper left corner settings menu;
- Click gs.key, popp up the file manager, and find the previously saved key file
- Then sett the Channel ((161 defaults, this Adapter only works in the 5.8GHz, and the available channels rangefrom 36 to 177 and Codec (H265defaults, with high compression and low latency),
- And then plug in the Receive Adapter (or network Adapter).
- The APP will prompt the current channel being used, and then it can be used normally
Ground stations
Ground stations can also use SBC such as Raspberry Pi, Radxa zero3w, Orange Pi 5, etc., all of which have HDMII interfaces, so FPV goggles and VRgoggles can be used as displays, and the transmission delay can be better than that of mobilephones.
Radxa zero3w is recommend for cost-effectiveness considerations
In addition to using the OpenIPC firmware, this VTX can also flash the Rubyfpv firmware, which is richer in settings and functions than OpenIPC, but currently has slightly higher latency.
With Receiver Type: 1x Debugger 1x Camerauff08Dual core come with IMX415 camerauff0csingle core come with IMX335uff09 1x Transmitter 1x Wiring Kit 1x Receiver
Without Receiver Type: 1x Debugger 1x Camerauff08Dual core come with IMX415 camerauff0csingle core come with IMX335uff09 1x Transmitter 1x Wiring Kit
Tested it for few hours, everything is working proprely. Flashed RubyFPV firmware without problems. lenty of power, picture is excelent for this price range. Recomend !
Tested it for few hours, everything is working properly. Flashed RubyFPV firmware without problems. Plenty of power, picture is excellent for this price range. Recommend!
Tested it for few hours, everything is working properly. Flashed RubyFPV firmware without problems. Plenty of power, picture is excellent for this price range. Recommend!
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-19 of 19|
Show Original
A part of the QA has been auto-translated.
0
Q:
I am still confused about the camera wiring. The connection between camera and transmitter has 4 wires. Is it USB? I am asking because the other OpenIPC FPV systems use MIPI Cable (similar to Runcam, DJI, and others). Thanks for answering.
I am still confused about the camera wiring. The connection between camera and transmitter has 4 wires. Is it USB ? I am asking because the other OpenIPC FPV systems use MIPI Cable (similar to Runcam, DJI, and others). Thanks for answering.
The adapter is a USB-C interface. The camera is digital. The cable of the camera is different from other OpenIPC because the cable of this one is hidden inside the camera. Currently, there is no unified standard for openipc cables.Thank you for your support to Banggood.
The adapter is a USB-C interface. The camera is digital. The cable of the camera is different from other OpenIPC because the cable of this one is hidden inside the camera. Currently, there is no unified standard for openipc cables.Thank you for your support to Banggood.
Answered by The seller on 15/01/2025Helpful (0)
0
Q:
Does anyone know if up to ten drones can fly simultaneously on a racetrack using the same system without the pilots experiencing image interference in the transmissions?
Weiß jemand, ob bis zu zehn Drohnen mit demselben System auf einer Rennstrecke gleichzeitig fliegen können, ohne dass die Fahrer Bildstörungen bei den Übertragungen bekommen?“
Thank you for your support to Banggood. We will get back to you as soon as possible.
Thank you for your support to Banggood. We will get back to you as soon as possible.
Answered by The seller on 22/04/2025Helpful (0)
0
Q:
Is it possible to switch down the mW because 800 mW is not allowed here in Germany? Allowed are up to 25 mW. Or does anyone know the same system but with less mW?
Is it possible to switch down the mW because 800 mW is not allowed here in Germany? Allowed are up to 25 mW. Or does anyone know the same system but with less mW? <br/>is it possible to stream on a small TV?<br/>Thank you very much.
The power can be modified by yourself. There is a configuration software that can lower the power. The configuration software can be downloaded from this link: *****
The power can be modified by yourself. There is a configuration software that can lower the power. The configuration software can be downloaded from this link: *****
Answered by The seller on 16/04/2025Helpful (0)
0
Q:
Can type C to HDMI be used to output images to a display? Receiver type C to HDMI converter to display.
можно ли использовать type c to hdmi чтобы выводить изображение на дисплей. ? reciever type c to hdmi converter to display.
Cannot be directly connected to a display, a decoder is required, such as a mobile phone.
Cannot be directly connected to a display, a decoder is required, such as a mobile phone.
Answered by The seller on 03/04/2025Helpful (0)
0
Q:
does this system have microphone?_if you flash with rubyfpv can you still use the vídeo receiver for android?_how much time Will it last with 3s lipo battery 2200mah 35c?
does this system have microphone?
if you flash with rubyfpv can you still use the vídeo receiver for android?
how much time Will it last with 3s lipo battery 2200mah 35c?
Hi, meta quest can be used, similar to installing an app on a mobile phone. Thank you.
Hi, meta quest can be used, similar to installing an app on a mobile phone. Thank you.
Answered by The seller on 08/03/2025Helpful (0)
0
Q:
can I purchase an image sensor separately? I got an imx415 and would like to swap the sensors board to imx335. Are boards compatible? if not, could you please specify the b2b connector model and pinout for it so I could make an adapter for sensors from openipc
can I purchase an image sensor separately? I got an imx415 and would like to swap the sensors board to imx335. Are boards compatible? if not, could you please specify the b2b connector model and pinout for it so I could make an adapter for sensors from openipc
The imx415 and imx335 sensor circuit boards of this product are compatible, but if he replaces it with another manufacturer's, it will not be compatible, which will be very troublesome.
The imx415 and imx335 sensor circuit boards of this product are compatible, but if he replaces it with another manufacturer's, it will not be compatible, which will be very troublesome.
Answered by The seller on 14/02/2025Helpful (0)
0
Q:
Can I record the image on a memory card directly in the transmitter?
Can I record the image on a memory card directly in the transmitter?
Thank you for your asking. The default configuration is three to five kilometers. If you want a long distance, you need to change to a better directional antenna. Hope ou have a good day.
Thank you for your asking. The default configuration is three to five kilometers. If you want a long distance, you need to change to a better directional antenna. Hope you have a good day.
Hello, Can be used on Windows, there is special software " Android App (FPVue or PixelPilot)". Move details pleace check the updated
page of the item. Thank you.
Hello, Can be used on Windows, there is special software
Answered by Jay on 25/01/2025Helpful (0)
0
Q:
Is RTL8812AU adapter usb-c or ethernet? can you update the images with the usb-c adapter?
Is RTL8812AU adapter usb-c or ethernet? can you update the images with the usb-c adapter?
Yes, RTL8812AU adapter is usb-c. Already updated the usb-c images on our website, please check. Thank you.
Yes, RTL8812AU adapter is usb-c
Answered by BG171735134 on 03/01/2025Helpful (0)
0
Q:
How is the received signal used to see the image? What do I need to connect to the receiver to see the image? Up to what distance is reception possible?
Il segnale in ricezione come viene utilizzato per vedere l'immagine? Cosa devo collegare al ricevitore per vedere l'immagine? Fino a che distanza si riceve?
if you buy the receiver version any decent android phone will work. otherwise you can build a ground station with a radxa 3w and connect the receiver to it.
if you buy the receiver version any decent android phone will work. otherwise you can build a ground station with a radxa 3w and connect the receiver to it.
Answered by Eddy85 on 20/12/2024Helpful (0)
0
Q:
Earn Badge
Earn Badge<br/>Is it possible to switch down the mW because 800 mW is not allowed here in Germany? Allowed are up to 25 mW. Or does anyone know the same system but with less mW? is it possible to stream on a small TV?Thank you very much.
Is it possible to switch down the mW because 800 mW is not allowed here in Germany? Allowed are up to 25 mW. Or does anyone know the same system but with less mW? Is it possible to stream on a small TV? Thank you very much.
Is it possible to switch down the mW because 800 mW is not allowed here in Germany? Allowed are up to 25 mW. Or does anyone know the same system but with less mW? is it possible to stream on a small TV?Thank you very much.