* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Description:Brand Name: FlyskyItem Name: FS-iA6 receiverChannels: 6Frequency Range :2.4-2 .48 GHzNumber of Band: 140Transmitting Power: not more than 20dBmReceiver Sensitivity:-105dBm2.4G modes: Automatic frequency second generation digital systemsEncoding: GFSKWeight: 6.4gInput Power :4.0-6 .5 V DCDimensions: 40.4 x 21.1 x 7.35 mmColor: Blacki-BUS Interface: NoData Acquisition Interface: NoCertification: CE0678,FCCUsage: Suitable for RC Airplane / gliders / helicopterCompatible Transmitter: Flysky FS-i10,FS-i6,FS-i4,FS-GT2F,FS-GT2E,FS-GT2B Features:Reliable, interference free 2.4GHz AFHDS2A signal operation.Ultra light weight design.Easy to bind and very fast link-up.6 channel receiver compatible Flysky i4 i6 i10 GT2E GT2F GT2G transmitter.Quick and extremely stable in performance. Package Included:1x Flysky FS-iA6 receiver
Perfect if you don't need PPM. It is much lighter than the FS-iA6B. To bind, plug the bind plug in the B/VCC port. Power on the Rx. Press and hold the bind button on the Tx and turn on the Tx. Wait a couple of seconds then release the bind button. Remove bind plug and then remove power from Rx.
Perfect if you don't need PPM. It is much lighter than the FS-iA6B. To bind, plug the bind plug in the B/VCC port. Power on the Rx. Press and hold the bind button on the Tx and turn on the Tx. Wait a couple of seconds then release the bind button. Remove bind plug and then remove power from Rx.
Perfect if you don't need PPM. It is much lighter than the FS-iA6B. To bind, plug the bind plug in the B/VCC port. Power on the Rx. Press and hold the bind button on the Tx and turn on the Tx. Wait a couple of seconds then release the bind button. Remove bind plug and then remove power from Rx.
Muy utilizado para nuestros planeadores y aviones con muy buen Rango y buena respuesta al Control Flysky i6. Revisiones y vuelos en Canal YouTube “DMC Tec”
Very used for our gliders and planes with very good range and good response to the Flysky i6 Control. Reviews and flights on YouTube Channel "DMC Tec"
Very used for our gliders and planes with very good range and good response to the Flysky i6 Control. Reviews and flights on YouTube Channel "DMC Tec"
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 77|
Show Original
A part of the QA has been auto-translated.
0
Q:
Will this work with RadioMaster TX16S using AFHDS 2A? Will it work with std. servos?
Will this work with RadioMaster TX16S using AFHDS 2A? Will it work with std. servos?
Yes this will work the same as your original Rx. However be aware that unlike the FS-iA6B Rx this one does NOT allow connection of sensors nor does it support I-BUS. I have a few of each of these receivers and use depends on the space available and importance of saving a few grams. Hope this helps.
Yes this will work the same as your original Rx. However be aware that unlike the FS-iA6B Rx this one does NOT allow connection of sensors nor does it support I-BUS. I have a few of each of these receivers and use depends on the space available and importance of saving a few grams. Hope this helps.
Answered by KiteDude on 19/06/2021Helpful (0)
0
Q:
can i connect 3volt small motor directly with this receiver of my small micro plane.
can i connect 3volt small motor directly with this receiver of my small micro plane.
This receiver has a rail that carries the 5 volts, that you provide, to all power pins. Your motor controller (ESC) will pass this 5 volts on to the motor. It sounds like you need a 1S receiver.
This receiver has a rail that carries the 5 volts, that you provide, to all power pins. Your motor controller (ESC) will pass this 5 volts on to the motor. It sounds like you need a 1S receiver.
Yes, it works fine with TGY-i6 radio, which is the same as FS-i6 with just a different marking. I have more than 10 receivers like this bond to TGY-i6 radio with no problem at all. The same for many friends in my flight team.
Yes, it works fine with TGY-i6 radio, which is the same as FS-i6 with just a different marking. I have more than 10 receivers like this bond to TGY-i6 radio with no problem at all. The same for many friends in my flight team.
Answered by mauriziofancinelli65 on 08/01/2021Helpful (0)
0
Q:
is it possible to use a 2s LiPo battery with this receptor ?
is it possible to use a 2s LiPo battery with this receptor ?
2s lipo voltage a little too high and not "safe" to use. if you want to use a 2s lipo I would recommend you run it through a bec. I use a bec for safety and on another plane I use a 2s 6.6Volt LiFe pack with no bec.
2s lipo voltage a little too high and not "safe" to use. if you want to use a 2s lipo I would recommend you run it through a bec. I use a bec for safety and on another plane I use a 2s 6.6Volt LiFe pack with no bec.
From my experience, further than the eye can see. Don't have an exact number but it's crazy long range. Have been able to fly into the clouds without losing range
From my experience, further than the eye can see. Don't have an exact number but it's crazy long range. Have been able to fly into the clouds without losing range
Answered by BG521145525 on 17/09/2021Helpful (0)
0
Q:
Will this receiver bind with a Turnigy Evolution Transmitter?
Will this receiver bind with a Turnigy Evolution Transmitter?
Theflysky receiver shown in the picture is for an airplane and a feeder boat!
No ibus, sbus!
Bind each channel separately !!
For FLYSKY tax!
taranis ....... ??? :)))
Theflysky receiver shown in the picture is for an airplane and a feeder boat!
No ibus, sbus!
Bind each channel separately !!
For FLYSKY tax!
taranis ....... ??? :)))
Answered by virsli68 on 12/11/2021Helpful (0)
0
Q:
meu codigo de rastreio esta correto? nao consigo rastrear
meu codigo de rastreio esta correto? nao consigo rastrear
yes but you have to turn off you're afhpds mode first to bind.
yes but you have to turn off you're afhpds mode first to bind.
Answered by BG321050541 on 15/01/2022Helpful (0)
0
Q:
I am unable to bind this to my RadioMaster TX16S..I am using latest version open TX.. someone has suggested using Flysky AFHDS 2A as the protocol.. but i cannot see this protocol on my tx16s ... can anyone advise if this receiver actually does bind with TX16s as i am reading conflicting remarks .. what protocol please ? cant see ( Flysky AFHDS 2A ) that is mentioned in this threads ? )
I am unable to bind this to my RadioMaster TX16S..I am using latest version open TX.. someone has suggested using Flysky AFHDS 2A as the protocol.. but i cannot see this protocol on my tx16s ... can anyone advise if this receiver actually does bind with TX16s as i am reading conflicting remarks .. what protocol please ? cant see ( Flysky AFHDS 2A ) that is mentioned in this threads ? )
yes it does!! flysky has 2-3 different protocols just have to find the correct one. So the first flysky protocol you find you should be able to find a few more just but pressing the scroll dial on the first protocol then switch and it bind until you find the right one
yes it does!! flysky has 2-3 different protocols just have to find the correct one. So the first flysky protocol you find you should be able to find a few more just but pressing the scroll dial on the first protocol then switch and it bind until you find the right one
Answered by Hobbyboy on 05/05/2021Helpful (0)
0
Q:
I am unable to bind this to my RadioMaster TX16S..I am using latest version open TX.. someone has suggested using Flysky AFHDS 2A as the protocol.. but i cannot see this protocol on my tx16s ... can anyone advise if this receiver actually does bind with TX16s as i am reading conflicting remarks .. what protocol please ? cant see ( Flysky AFHDS 2A ) that is mentioned in this threads ? ) thanks
I am unable to bind this to my RadioMaster TX16S..I am using latest version open TX.. someone has suggested using Flysky AFHDS 2A as the protocol.. but i cannot see this protocol on my tx16s ... can anyone advise if this receiver actually does bind with TX16s as i am reading conflicting remarks .. what protocol please ? cant see ( Flysky AFHDS 2A ) that is mentioned in this threads ? ) thanks
This receiver uses the AFHDS 2A protocol so it will work with i6, i6X, i6S, i4X, i8, TH9X (with the correct module, see product id 1194145), i10, NV14 (Nirvana), GT5, i4TS, GT2E, GT2F, GT2G. Also works with Turnigy TGY-i6, Evolution, and possibly others. Some of the transmitters support dual protocols so you may have to switch protocol in the TX settings
This receiver uses the AFHDS 2A protocol so it will work with i6, i6X, i6S, i4X, i8, TH9X (with the correct module, see product id 1194145), i10, NV14 (Nirvana), GT5, i4TS, GT2E, GT2F, GT2G. Also works with Turnigy TGY-i6, Evolution, and possibly others. Some of the transmitters support dual protocols so you may have to switch protocol in the TX settings