* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
- Suitable for battery types of sealed lead acid, vented Gel, and Lithium battery
Notes:
1. The output terminal is for lamp only ( 12V system less 60W, 24V/36V/48V system less 100W ),and it will be burnt if connecting to other loads. The output for battery is no polarity reverse protection.
2. You can Put two pieces 60A in parallel ,So total is MPPT 120A.
This is my first purchase from Banggood and I'm hugely impressed.
Simple easy transaction with good commincation throughout. Tracking of parcel was really accurate. Postage to UK from date of order took 10 days - brilliant.
The charge controller is excellent and easy to set up and the Instructions are simple to follow. Build quality is top class, and for the price you cannot go wrong.
More than happy to recommend.
This is my first purchase from Banggood and I'm hugely impressed.
Simple easy transaction with good commincation throughout. Tracking of parcel was really accurate. Postage to UK from date of order took 10 days - brilliant.
The charge controller is excellent and easy to set up and the Instructions are simple to follow. Build quality is top class, and for the price you cannot go wrong.
More than happy to recommend.
This is my first purchase from Banggood and I'm hugely impressed.
Simple easy transaction with good commincation throughout. Tracking of parcel was really accurate. Postage to UK from date of order took 10 days - brilliant.
The charge controller is excellent and easy to set up and the Instructions are simple to follow. Build quality is top class, and for the price you cannot go wrong.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 83|
Show Original
A part of the QA has been auto-translated.
0
Q:
can you adjust the voltage for a lithium battery eg- 8s ,7s for 24v ?
can you adjust the voltage for a lithium battery eg- 8s ,7s for 24v ?
Pro vstup se nic nenastavuje, ale pokud máte problém s 150-24V nejspíš budete muset použít baterií minimálně 36V nebo dát panely serioparalerně 75-24V. Nastavuje se pouze výstup. Pro nastavení výstupních hodnot je však nutno odpojit vstup a teprve nastavovat hodnoty. Pozor při dalším odpojení baterie se hodnoty vynulují na původní a může to poškodit baterií pokud by se hodnoty výrazně lišily v její neprospěch od těch výchozích. To se nestane jen při 12V.
Nothing is set up for input, but if you have a problem with 150-24V you will probably need to use a battery of at least 36V or put the panels serioparallelly 75-24V. Only output is set. However, it is necessary to disconnect the input and set the values to set the output values. Be careful when the battery is disconnected further, the values will reset to the original and it can damage the battery if the values differ significantly to its disadvantage from the default ones. That's not just gonna happen at 12V.
εγώ έχω πλήρωση εδώ και 2,5 μήνες και δεν έχουν στείλει ακόμα. ντροπή
I've been paying for 2.5 months and haven't sent yet. Shame on you
Answered by BG163716332 on 06/05/2023Helpful (0)
0
Q:
Dual input:
Can this unit accept 2 different and separate PV voltage inputs?
On the lower right of the unit there are two separate PV inputs are these inputs electronically independent of each other?
Without exceeding the 60A total could one input be 12V (@15A) and the other be 24V (@20A)?
Thanx in advance…
Dual input:Can this unit accept 2 different and separate PV voltage inputs? On the lower right of the unit there are two separate PV inputs, are these inputs electronically independent of each other?Without exceeding the 60A total could one input be 12V (@15A) and the other be 24V (@20A)?Thanx in advance…
No. The two inputs are simply in parallel to allow using smaller wire from the solar panels. Be aware that the PowMr has limits on the lowest and highest solar panel voltages for a given battery bank, such as 20-80 volts solar for a 12 volt battery. Read the manual carefully and be very aware that the PowMr REQUIRES at least 20 volts solar input for a 12 volt battery. That means a single 100 watt panel will probably NOT work as the panel's under-load voltage will be in the range of 17-18 volts and that's not enough.
No. The two inputs are simply in parallel to allow using smaller wire from the solar panels. Be aware that the PowMr has limits on the lowest and highest solar panel voltages for a given battery bank, such as 20-80 volts solar for a 12 volt battery. Read the manual carefully and be very aware that the PowMr REQUIRES at least 20 volts solar input for a 12 volt battery. That means a single 100 watt panel will probably NOT work as the panel's under-load voltage will be in the range of 17-18 volts and that's not enough.
Answered by notyoung on 17/06/2022Helpful (0)
0
Q:
So a MPPT 60 with 4x 330 wp ,Umpp33,86Impp 9,79 Uoc 40,26 Isc 10,22 panels with 2x deep cycle 200ah batteries and a 3000 inverter should work just fine. Correct? Thank you for answering.
So a MPPT 60 with 4x 330 wp ,Umpp33,86Impp 9,79 Uoc 40,26 Isc 10,22 panels with 2x deep cycle 200ah batteries and a 3000 inverter should work just fine. Correct? Thank you for answering.
Dear salesperson. There is an older version of this controller. I would like to know if the version of this ad is the oldest or most recent? The latest one has a modified label.
Caro vendedor. Existe uma versão mais antiga desse controlador. Eu gostaria de saber se a versão deste anuncio é a mais antiga ou a mais recente? A mais recente tem uma etiqueta modificada. A da foto do lado é do modelo mais antigo.
How do I choose the 60A version? I want this one, but there's an ad with various prices and models and there's no place to choose them, if I buy them where I say I want the 60th one, and how much is the 60th one costing?
How do I choose the 60A version? I want this one, but there's an ad with various prices and models and there's no place to choose them, if I buy them where I say I want the 60th one, and how much is the 60th one costing?
they are crap slow.... every time if i order one of these it takes 3 - 4 days BEFORE they start sending the package to you. I order it from the czech warehouse so that it goes faster and it still takes 10 days because they take so long to send the package.Better you buy at ali express EU storage.
they are crap slow.... every time if i order one of these it takes 3 - 4 days BEFORE they start sending the package to you. I order it from the czech warehouse so that it goes faster and it still takes 10 days because they take so long to send the package.Better you buy at ali express EU storage.
Answered by megahaze on 27/09/2020Helpful (0)
0
Q:
What version 60A MPPT with wifi?
Version 119 c wifi is available?
Qual versão 60A MPPT com wifi?
versão 119 c wifi tem disponível?
maybe you can search the keyword with "20a solar power supply"
maybe you can search the keyword with "20a solar power supply"
Answered by Acarophobia on 04/12/2023Helpful (0)
0
Q:
I bought two 2 of 60 amp is connected to a 24 v system, but they have different battery readings about 0.5v. One shows 25.6 the other 26 is also different is the cooling function
starts and stops at different temperatures
αγόρασα δύο 2 των 60 amp είναι συνδεδεμένο σε σύστημα 24 v άλλα έχουν διαφορετικές ενδείξεις μπαταρίας περίπου 0.5v το ένα δείχνει 25,6 το άλλο 26 επίσης διαφορετική είναι η λειτουργία ψύξης
αρχίζει και σταματά σε διαφορετικές θερμοκρασίες
I would be satisfied, but if I plug in a series of panels that give a voltage approaching 150V, then for some strange reason the controller switches to night traffic and turns off the charging. Does anyone know why this happens when the manufacturer states voltage PV up to 150VjQuery1113035731638684082_1658181071672
Byl bych spokojen, ale když zapojím do série panely které dávají napětí blížící se 150V, pak z nějakého podivného důvodu se regulátor přepne do nočního provozu a vypne nabíjení. Neví někdo proč se tak děje když výrobce uvádí napětí PV až 150VjQuery111303573162638684082_1658181071672