* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Description: Full integration on one board: Uno R3 ATmega 328 and WiFi ESP8266 with memory 32Mb (MegaByte). All of the modules can work together or each separately. And everyone has their own pinout headers. The convenient solution for the development of new projects requiring U n o and WiFi. Via USB you can update sketches and firmvare for ATmega328 and for ESP8266. For this on board have the USB-serial converter CH340G. Use this board is very simple. The board has DIP-switch, to connect the modules. For example, to: USB and ATmega328, USB and ESP8266, ATmega328 and ESP8266. Table DIP- switch:
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-15 of 15|
Show Original
A part of the QA has been auto-translated.
0
Q:
Can this be used for IoT projects via Blynk? What example from here will do it: https://examples.blynk.cc/? Arduino UNO with ESP shield?
Can this be used for IoT projects via Blynk? What example from here will do it: https://examples.blynk.cc/? Arduino UNO with ESP shield?
Can you please help me to identify the right option to configure this board on my IDE board manager? Some libraries require to run on (avr) architecture(s) so the generic ESP8266 option is working. Thanks
Can you please help me to identify the right option to configure this board on my IDE board manager? Some libraries require to run on (avr) architecture(s) so the generic ESP8266 option is working. Thanks
I need to know what the CH_PD is for and also the TOUT pin of the ESP8266 chip because there's no information in the documentation about these two pins, does anybody know what these pins are for?
I need to know what the CH_PD is for and also the TOUT pin of the ESP8266 chip because there's no information in the documentation about these two pins, does anybody know what these pins are for?
Hi. I have a problem trying to connect this board to my computer. It appears to me as an unknown device, I install the drivers but cannot find any, I get an error that says: Profinet IO protocol (DCP / LLDP). The device is missing an input.
I have already tried to install with the ones that come on this page but they don't do anything or I don't know how to install them. What I can do? Thank you.
Hi. I have a problem trying to connect this board to my computer. It appears to me as an unknown device, I install the drivers but cannot find any, I get an error that says: Profinet IO protocol (DCP / LLDP). The device is missing an input.
I have already tried to install with the ones that come on this page but they don't do anything or I don't know how to install them. What I can do? Thank you.
Need to dial code settings. Please see the description.
Need to dial code settings. Please see the description.
Answered by Taner on 04/01/2021Helpful (0)
0
Q:
Any body has success making this UNO Wirelessly ? I am able to make it work like a normal UNO with SW 3 & SW 4 ON. I tried SW 1 & SW 2 ON to load a sketch to ESP8266 but failed as in this configuration Windows did not provide a serial port . Thanks
Any body has success making this UNO Wirelessly ? I am able to make it work like a normal UNO with SW 3 & SW 4 ON. I tried SW 1 & SW 2 ON to load a sketch to ESP8266 but failed as in this configuration Windows did not provide a serial port . Thanks
this may helpHow it use: http://myosuploads3.banggood.com/products/20181118/20181118203901SKU742046.docx
this may helpHow it use: http://myosuploads3.banggood.com/products/20181118/20181118203901SKU742046.docx
Answered by Ambrosial on 10/10/2020Helpful (0)
0
Q:
I am following the steps in Word file and i get the following message, Nothing is changing ..... "Leaving...
Hard resetting via RTS pin..." what should I do ?
I am following the steps in Word file and i get the following message, Nothing is changing ..... "Leaving...
Hard resetting via RTS pin..." what should I do ?
How it use: http://myosuploads3.banggood.com/products/20181118/20181118203901SKU742046.docx
How it use: http://myosuploads3.banggood.com/products/20181118/20181118203901SKU742046.docx
Answered by Celeripedean on 28/02/2020Helpful (0)
0
Q:
I tried to connect the board over USB but get no connection to the board (Linux or Windows). Seems that the USB->Serial Converter on board is not recognized. If I want to upload a sketch to the Arduino Chip, how shall the Dip-switch be configured?
I tried to connect the board over USB but get no connection to the board (Linux or Windows). Seems that the USB->Serial Converter on board is not recognized. If I want to upload a sketch to the Arduino Chip, how shall the Dip-switch be configured?
Hi, there are 2 RED LED that are on on the board one is marked L is blxinking and one is near ESP8266 is always on. is that normal?
Hi, there are 2 RED LED that are on on the board one is marked L is blinking and one is near ESP8266 is always on. is that normal?<br/>I am trying to load a sketch using the USB cable (using just 340 - DIP Switch 3 and 4 on) but I get an error Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding