Eachine TX805S 5.8GHz 40CH 25-500-1000-1600mW AV FPV Transmitter VTX LED Display With Mic Heatsink Support OSD/Pitmode/Smart Audio for RC Drone Airplane Long Rang
* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Blue LED light on stands for CH1, short presses to change 8 channels sequentially.
For CH2/ 3/ 4/ 5/ 6/ 7/ 8, Blue LED flicker once, it won"t light on.
Notice: Blue LED only light on for CH1
Band select:
Press button for 2S, Red LED will flash, then short presses to select 5 bands.
Power select:
Press button for 4S, Red LED will flash, then select power by simple short presses to select 25mW/ 500mW/ 1000mW sequentially,For 500mW, Green LED flicker once, it won"t light on; For 1000mW Blue LED flicker once, it won"t light on. Press the button again,Red LED, Green LED and Blue LED lights together, Represents the highest power 1600mW.
Notice: Red LED only light on for 25mW.
Pit Mode(0.01mW)
While in Pit Mode you can change channels and power levels, but none of these changes will take effect until you quit Pit Mode.By default, Pit Mode will send a very weak signal.
Two ways to exit pit mode:
Press button 12S until all 16 LED turned off and light on again to exit pit mode, or you can exit pit mode via Betaflight OSD.
Notice:The VTX has memory for settings, To change the settings, please repeat steps as above.
Features:
- Support Smart audio
- 25mW/500mW/1000mW/1600mW power switchable
- One button frequency and power setup
- OSD configuration using smart audio
- Wide input Voltag with 5V for camera
- 40 channels with MIC
- Solid MMCX Antenna connection and MMCX Brass Dipole Antenna
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-25 of 25|
Show Original
A part of the QA has been auto-translated.
0
Q:
I need this product in India. but how? can anyone help me please
I need this product in India. but how? can anyone help me please
No reception, it cannot deliver 1600mW power. I lost my drone due to a fault in the product. I sent it 250 meters ahead. The signal was cut off. My drone was lost, even though there was no obstacle in the way.
No reception, it cannot deliver 1600mW power. I lost my drone due to a fault in the product. I sent it 250 meters ahead. The signal was cut off. My drone was lost, even though there was no obstacle in the way.
Answered by BG543316203 on 24/01/2024Helpful (0)
0
Q:
standard VTX tables don’t work for this. I found a post for tx805 which works, but power output is limited to 800mW. Is there a webpage with the VTX table?
standard VTX tables don’t work for this. I found a post for tx805 which works, but power output is limited to 800mW. Is there a webpage with the VTX table?
The Post for the tx805 json from github will work at rated power the TX805S.. ignor the fact it say 800, its actually providing the full at 1.6w at the 4th power setting...
The Post for the tx805 json from github will work at rated power the TX805S.. ignor the fact it say 800, its actually providing the full at 1.6w at the 4th power setting...
Answered by Ian on 19/05/2021Helpful (0)
0
Q:
i have this vtx.switching power in the osd i get 25mw 200mw 500mw 800mw ?
i have this vtx.switching power in the osd i get 25mw 200mw 500mw 800mw ?
Es la potencia de transmisin, por lo general a mayor potencia de transmisin tendra mayor alcance pero no hay una precision en la regla porque la potencia puede ser afectada por el diseo, antenas, terreno, saturacion de seales, etc.
Es la potencia de transmisin, por lo general a mayor potencia de transmisin tendra mayor alcance pero no hay una precision en la regla porque la potencia puede ser afectada por el diseo, antenas, terreno, saturacion de seales, etc.
Answered by jairo_antonio_alvarez on 30/05/2021Helpful (0)
0
Q:
Hello,
I see a microphone in board. how it can work ? I tested with my goggle EV200D but I not received any audio/sound. thanks for help.
Hello,
I see a microphone in board. how it can work ? I tested with my goggle EV200D but I not received any audio/sound. thanks for help.
The transmitter has a 'smart audio' connector pin, but the instruction manual gives no details on how to use this. I would like to know the protocol, the codes for setting power levels etc. The plane I want to use it in does not have a flight controller, so I want to provide the smart audio commands from my own electronics. Can you tell me where to find the information on the codes.
The transmitter has a 'smart audio' connector pin, but the instruction manual gives no details on how to use this. I would like to know the protocol, the codes for setting power levels etc. The plane I want to use it in does not have a flight controller, so I want to provide the smart audio commands from my own electronics. Can you tell me where to find the information on the codes.
draw is linearly change with your supply voltage. Note that mW = mA * V which means if you are using 4s battery 1600 diveded by 16.4=97.5 mA theoretically
draw is linearly change with your supply voltage. Note that mW = mA * V which means if you are using 4s battery 1600 diveded by 16.4=97.5 mA theoretically